Inside Diameter Processing Machine(Manual Type) | TL-M
It is an inside diameter processing machine of one-piece picking which moves a taper wire to right and left manually and into which it processes it, rotating a ferrule by a motor.
Since cost performance is high, initial investment can be suppressed.
Moreover, it is ideal also for small-quantity processing of a special article and manufacture of a test article.
Feature
- 150 processings/hour are possible (it changes with material inside diameter sizes).
- High deviation from circular form is realized by not being subject to the influence of other works by one-piece picking processing.
- Overwhelming cost performance was realized.
- A maintenance is easy because of a simple structure.
Technical Specification
| Machine size (W×D×H) | 1240mm x 340mm x 201mm |
| Machine weight | 30kg |
| Stroke | 600mm |
| Motor drive | Foot switch |
Option | Consumables
| Option | Valious collet chuck |
| Consumables | Piano wire |
| Diamond powder | |
| Oil for slurries | |
| Equipment consumables | Collet chuck |
Wire Etching Machine for TL-M | TBW-M (Incidental Equipment)
It is the equipment which manufactures the taper wire of a manual inside diameter processing machine "TL-M."
It is possible to manufacture the taper wire for ten inside diameter processing machines by one set.
| Machine size (W×D×H) | 600mm x 400mm x 1050mm |
| Machine weight | 70kg |
| Drive system | Toggle switch ON/OFF |
| Consumables | Etching solution |
| Neutralizing solution | |
| Felt |
Line up of Ferrule Processing Machine
