Outside Diameter Mesurement Machine(Auto Type) | ODM-A
It is the full automatic measurement and the identifying device which measure the outside diameter of a ferrule highly efficiently.
An inspection method throws in a work in a parts feeder, carries out direction distinction, and carries out laser measurement.
The maximum and the minimum are set in advance and the outside diameter of a work is measured.
3 position cylinder is used at the time of work discharge.
The outside diameter of a work is measured by three places and sorted out by three kinds such as LARGE, OK, and SMALL.
Various setup is possible by a touch panel.
Feature
- 800 measurement/hour is possible by SC type (when it is three-point measurement).
- Measurement can be chosen from one point to five points, and is set up by the required number of the point of measurement, and tact time.
- A maintenance is easy.
- Since it is a full automatic type, a work is thrown into a parts feeder and it is only easy operation of pushing a start button.
Technical Specification
Machine size (W~D~H) | 550mm x 550mm x 500mm |
Machine weight | 70kg |
Inspection speed | 800pcs/H |
Measurement accuracy | }0.1Κm |
Operation | Touch panel |
Option | Consumables
Option | 2.5o, 1.25ochange unit |
Line up of Ferrule Inspection Machine